Pd‐catalyzed desulfitative Hiyama coupling with sulfonyl chlorides

Palladium‐catalyzed desulfitative Hiyama cross‐coupling reactions of various arylsulfonyl chlorides with aryltriethoxysilane have been achieved in good yields. The reported cross‐coupling reactions are tolerant to the common functional groups regardless of electron‐withdrawing or electron‐donating, making these transformations attractive alternatives to the traditional cross‐coupling approaches. Copyright © 2014 John Wiley & Sons, Ltd.     

θ-2θ型X射线衍射仪测定水溶液的结构

采用θ-2θ型粉末衍射仪并以NaCl溶液为研究对象,完成了该溶液不同浓度的结构测定,验证了方法在测定溶液尤其是低浓度溶液中的可行性。由衍射数据可知,随着浓度的提高,溶液的衍射曲线的特征峰由13.4°到14°发生偏移,且19°肩峰逐渐消失,表明随着浓度的增大,NaCl溶液的微观结构发生了较明显的变化。利用PDFgetX3软件对衍射数据进行了处理,得到了溶液的差值对分布函数,由差值对分布函数分析得到水分子间O-O间的峰位为0.276nm,该峰随浓度的增大,逐渐降低,当质量分数大于15%时出现了较明显的0.314nm处的Cl--O峰。     

连续损伤力学基临界奇异指数与破坏时间预测

响应量在临近破坏时呈现出临界幂律奇异性加速特征,是一种被广泛证实的灾变破坏前兆,并被火山、滑坡和岩石破坏实验等后验预测结果证实为一种对破坏时间进行短临期预测的可行方法.但是,奇异性指数测量值的较大分散性导致了对其具体取值的争议和预测效果的不确定性.因此,理解奇异性指数取值特征及其内在物理控制因素,成为了一个核心问题.本文基于连续介质损伤力学和材料时间相关失效特征,构建了刻画损伤加速发展通向破坏过程的力学模型.导出了恒名义应力蠕变加载和控制名义应力随时间线性增大两种典型加载方式下,损伤和应变率加速发展通向破坏的临界幂律奇异性前兆特征.阐明了临界幂律奇异性指数取值依赖于材料损伤与承受真应力之间的非线性关系这一内在物理根源,表明了实际测量中奇异性指数的分散性不完全归结于测量数据误差,而是有着内在物理控制因素.针对破坏前奇异性指数的不确定性,建议了在未知奇异性指数条件下预测破坏时间的方法,并基于花岗岩脆性蠕变破坏实验进行了验证和说明.      

负泊松比蜂窝材料的动力学响应及能量吸收特性

针对传统正方形蜂窝，通过用更小的双向内凹结构胞元替代原蜂窝材料的结构节点，得到了一种具有负泊松比特性的节点层级蜂窝材料模型。利用显式动力有限元方法，研究了冲击荷载作用下该负泊松比蜂窝结构的动力学响应及能量吸收特性。研究结果表明，除了冲击速度和相对密度，负泊松比蜂窝材料的动力学性能亦取决于胞元微结构。与正方形蜂窝相比，该负泊松比层级蜂窝材料的动态承载能力和能量吸收能力明显增强。在中低速冲击下，试件表现为拉胀材料明显的"颈缩"现象，并展示出负泊松比材料独特的平台应力增强效应。基于能量吸收效率方法和一维冲击波理论，给出了负泊松比蜂窝材料的密实应变和动态平台应力的经验公式，以预测该蜂窝材料的动态承载能力。本文的研究将为负泊松比多胞材料冲击动力学性能的多目标优化设计提供新的设计思路。     

Cryptanalysis and Improvement of Ye et al’s Quantum Private Comparison Protocol

Recently, Ye et al. (Int. J. Theor. Phys. 56, 1517–1529, 2017) proposed a quantum private comparison (QPC) protocol based on five-qubit entanglement state. Two parties can verify that their secret information is equal or not with the help of the semi-honest third party (TP). However, in this paper we will point out the Ye et al.’s initial protocol is not safe under a special participant attack. That is a malicious participant can get the other party’s secret input information illegally under the forgery attack. Furthermore, we give two possible improvement protocols, which can perform this protocol secure against this kind of attack.

     

Required minimum cavity dispersion in stable,graphene mode-locked,Yb-doped fiber lasers

Optical Review - We have numerically investigated the required minimum cavity dispersion (RMCD) for obtaining stable pulses in net normal dispersion, graphene mode-locked, Yb-doped fiber lasers...     

A novel cationic emulsifier used for preparing slow-cracking and rapid-setting asphalt: Synthesis,surface activity,and emulsification ability

A novel cationic emulsifier including nonionic fatty alcohol polyoxyethylene ether was synthesized in two steps from epichlorohydrin, octadecyl dimethyl amine, and fatty alcohol polyoxyethylene ether, and the intermediate product could also be used as an emulsifier. Their structures were characterized by FTIR, and the surface activities were investigated by surface tension, electrical conductivity, and HLB. The obtained results indicated that the critical micelle concentration (CMC) of the final product was low, 0.442 mmol/L, and the surface tension at the CMC was 41.02 mN/m. The hydrophile-lipophile balance (HLB) value was 12, which meet the requirements of asphalt emulsifiers. A series of experiments of the emulsified asphalt prepared by the emulsifiers were performed. The results showed that the emulsified asphalt could be stably stored for more than 5 days when the emulsifier was 2 wt% and the pH value was between 3 and 4. The result of demulsification experiments showed that the emulsifier is a slow-cracking and rapid-setting asphalt emulsifier.     

A novel adaptive spectrum reservation strategy in CRNs and its performance optimization

Spectrum reservation strategy is an effective technology for conserving communication resources in Cognitive Radio Networks. In order to better adapt to changes of the system load, we present an adaptive control approach to determine the reservation ratio of the licensed spectrum for secondary users and propose a novel adaptive spectrum reservation strategy. We then establish a three-dimensional discrete time Markov Chain model to capture the stochastic behavior of users. By using a method similar to that of the matrix geometric solution, we obtain the steady-state probability distribution for the system model, and derive the formulas for some required performance measures of two types of users. Numerical experiments and simulation experiments indicate that the system performance is sensitive to system parameters like the adaptive control factor and the admission threshold. Finally, we construct a system cost function to balance different performance measures, and present an intelligent searching algorithm to optimize the system parameters with the global minimum system cost.     

Analysis and modeling of radiometric error caused by imaging blur in optical remote sensing systems

Imaging blur changes the digital output values of imaging systems. It leads to radiometric errors when the system is used for measurement. In this paper, we focus on the radiometric error due to imaging blur in remote sensing imaging systems. First, in accordance with the radiometric response calibration of imaging systems, we provide a theoretical analysis on the evaluation standard of radiometric errors caused by imaging blur. Then, we build a radiometric error model for imaging blur based on the natural stochastic fractal characteristics of remote sensing images. Finally, we verify the model by simulations and physical defocus experiments. The simulation results show that the modeling estimation result approaches to the simulation computation. The maximum difference of relative MSE (Mean Squared Error) between simulation computation and modeling estimation can achieve 1.6%. The physical experimental results show that the maximum difference of relative MSE between experimental results and modeling estimation is only 1.29% under experimental conditions. Simulations and experiments demonstrate that the proposed model is correct, which can be used to estimate the radiometric error caused by imaging blur in remote sensing images. This research is of great importance for radiometric measurement system evaluation and application.     

Polyvinyl pyrrolidone-assisted synthesis of flower-like nickel-cobalt layered double hydroxide on Ni foam for high-performance hybrid supercapacitor

Nickel-cobalt layered double hydroxides (NiCo-LDH) were successfully deposited on nickel foam by a facile hydrothermal method using polyvinyl pyrrolidone (PVP) as the structure-directing reagent. The effect of PVP on the morphology and electrochemical performance of binder-free NiCo-LDH electrode for supercapacitor were investigated in detail. The prepared NiCo-LDH presented good dispersivity and appeared different flower-like structure via the addition of PVP. Specially, the NiCo-LDH electrode using 1 g of PVP exhibited a superior performance with a high-specific capacity of 724.9 C g^?1 at a current density of 1 A g^?1 and 577.1 C g^?1 at 10 A g^?1. In addition, a hybrid supercapacitor (HSC) based on the optimized NiCo-LDH as positive electrode and activated carbon as negative electrode was assembled with 6 M KOH as the electrolyte. The HSC device can deliver an energy density of 32.3 Wh kg^?1 at the power density of 387.1 W kg^?1. Moreover, the HSC device exhibited a good cycling stability with a retention rate of 94.0% after 2000-cycle charge-discharge test at 3 A g^?1.